Cant connect Android Wear-Gerät über bluetooth
Ich habe USB-debugging an und ich zeige, dass das Ziel verbunden, die ich jedoch bin nicht in der Lage eine Verbindung zu dem host.
Wenn ich führen Sie den nachstehenden Befehl auf meinem PC erhalte ich die Ausgabe, die angibt, dass der Befehl nicht abgeschlossen ist.
adb forward tcp:4444 localabstract:/adb-hub; adb connect localhost:4444
Ausgabe:
C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Android Studio>adb forward
tcp: 4444 localabstract:/adb-hub;adb connect localhost:4444
Android Debug Bridge version 1.0.31
-a - directs adb to listen on all interfaces for a c
onnection
-d - directs command to the only connected USB devic
e
returns an error if more than one USB device is
present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is r
unning.
-s <specific device> - directs command to the device or emulator with
the given
serial number or qualifier. Overrides ANDROID_S
ERIAL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
-H - Name of adb server host (default: localhost)
-P - Port of adb server (default: 5037)
devices [-l] - list all connected devices
('-l' will also list device qualifiers)
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number
is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number
is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devic
es.
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward --list - list all forward socket connections.
the format is a list of lines with the followin
g format:
<serial> " " <local> " " <remote> "\n"
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb forward --no-rebind <local> <remote>
- same as 'adb forward <local> <remote>' but fail
s
if <local> is already forwarded
adb forward --remove <local> - remove a specific forward socket connection
adb forward --remove-all - remove all forward socket connections
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] [--algo <algorithm name> --key <hex-encoded key> --
iv <hex-encoded iv>] <file>
- push this package file to the device and instal
l it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data
)
('-s' means install on SD card instead of inter
nal storage)
('--algo', '--key', and '--iv' mean the file is
encrypted already)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories
)
adb bugreport - return all information from the device
that should be included in a bug report.
adb backup [-f <file>] [-apk|-noapk] [-obb|-noobb] [-shared|-noshared] [-all]
[-system|-nosystem] [<packages...>]
- write an archive of the device's data to <file>
.
If no -f option is supplied then the data is wr
itten
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks
themselves
in the archive; the default is noapk.)
(-obb|-noobb enable/disable backup of any insta
lled apk expansion
(aka .obb) files associated with each applic
ation; the default
is noobb.)
(-shared|-noshared enable/disable backup of the
device's
shared storage /SD card contents; the defau
lt is noshared.)
(-all means to back up all installed applicatio
ns)
(-system|-nosystem toggles whether -all automat
ically includes
system applications; the default is to inclu
de system apps)
(<packages...> is the list of applications to b
e backed up. If
the -all or -shared flags are passed, then t
he package
list is optional. Applications explicitly g
iven on the
command line will be included even if -nosys
tem would
ordinarily cause them to be omitted.)
adb restore <file> - restore device contents from the <file> backup
archive
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb get-devpath - prints: <device-path>
adb status-window - continuously print device status for a specifie
d device
adb remount - remounts the /system partition on the device re
ad-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the boo
tloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on th
e specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be u
pdated.
- If it is "system" or "data", only the corresponding partition
is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list
of the following values
1 or all, adb, sockets, packets, rwx, usb, sync
sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes prior
ity over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these de
bug tags are printed.
bitte @UhrArt einen gefallen und klicken Sie auf das grüne Häkchen, um seine Antwort zu markieren es als solches.
InformationsquelleAutor user2941841 | 2014-08-03
Du musst angemeldet sein, um einen Kommentar abzugeben.
Für Ihre Informationen, die ich endlich gelöst ist das gleiche problem durch den Austausch port 4444 von 5601.
Die 2 Anrufe sind:
und
(Meine Android-Wear-Gerät ist ein LG G Watch und mein Android-tablet ist ein Asus Nexus 7)
Ich bekomme eine Fehlermeldung:
unable to connect to localhost:5601: Connection refused
Gleiche problem hier mit connection refused
InformationsquelleAutor MagikoSoft
Dies ist einfach zu lösen:
Ich hatte das gleiche problem.
Nur teilen diese in zwei Anrufe.
Geben Sie zuerst:
drücken Sie die EINGABETASTE und danach:
Eingeben und es eine Verbindung herstellen soll. Wenn nicht, versuchen Sie zuerst, zu Beginn der "adb start-server"
auch stellen Sie sicher, dass bluetooth-Debuggen aktiviert ist, auf der UHR nicht nur das Telefon. Gehen Sie zu Einstellungen->Über und Tippen Sie auf Build 5 mal um die Uhr im developer-Modus.
Arbeitet für die Verbindung, kann Sie aber nicht hochladen, APKs. Nur stuck am
Uploading file to: /data/local/tmp/com.example.android.google.wearable.app
keine Verbindung zu localhost:4444: Connection refused
Noch immer Connection refused Fehler.
InformationsquelleAutor UhrArt
versuchen, die Ip-Adresse anstelle von localhost, wenn die Verbindung
adb forward tcp:4444 localabstract:/adb-hub
adb connect 127.0.0.1:4444
InformationsquelleAutor Ilyas Gunduz
Hatte ich dieses problem auch. Nach dem ausführen der oben genannten Befehle in der Befehlszeile ein, ich löste es durch das aktivieren der Entwickler-Optionen auf meine Moto 360 (drücken der build-Nummer mehrmals in den Einstellungen, wie das Telefon). Aktivieren der ADB und Bluetooth-Debugging auf der Uhr und unpairing meine Uhr mit meinem Handy.
Nachdem ich all diese Schritte mein computer schickte schließlich RSA-Schlüssel Berechtigungen für mein Android-Wear-Gerät über mein Handy.
Nur versuchen, ein paar verschiedene Dinge, damit das Telefon die Bluetooth-Verbindung zurückgesetzt. Unpairing und koppeln die smart watch war eine der Dinge, die ich versuchte.
InformationsquelleAutor c0deblooded
Die Komplette Lösung für dieses Problem..
Bevor Sie zu Schritt 4 pls stellen thet debugging über bluetooth ist aktiviert in den Entwickler option.
InformationsquelleAutor Anees
InformationsquelleAutor Alberto Perez
Hatte ich auch Problem, adb-debugging über bluethooth:
Debugging over Bluetooth
war immerOff
für mich. Ich hatte anscheinend zu wählen Sie eine debugging-wearable-Gerät hier:Android Wear -> Settings (gear icon) -> Debugging over Bluetooth -> Device to Debug
Dann alle anderen Kommentare sind auch hilfreich.
InformationsquelleAutor ViliusK
Versucht, alle der oben genannten, nichts half.
Das einzige, was mir geholfen, war nach dem Neustart das Telefon...
InformationsquelleAutor Eli